page . 1 june 01.2012-rev.02 SV1040 schottky barrier rectifier voltage 40 volt 10 ampere mechanical data case : to-277, plastic terminals : solderable per mil-std-750, method 2026 weight : 0.0037 ounces, 0.1073 grams marking : SV1040 current absolute maximum ratings (t a =25 o c unless otherwise noted) 0.172(4.35) 0.167(4.25) 0.048(1.20) 0.039(1.00) 0.136(3 45) 0.128(3 25) . . 0.085(2 15) 0.076(1 95) . . 0.083(2 10) . 0.014(0.35) 0.009(0.25) 0.052(1.30) 0.044(1.10) 0.243(6.15) 0.238(6.05) 0.262(6.65) 0.250(6.35) 0.183(4.65) 0.171(4.35) 0.043(1.10) 0.035(0.90) notes: 1.mounted on 2cm 2 fr-4 pcb. 2.mounted on 50cm 2 copper pad area. parameter symbol value unit maximum recurrent peak reverse voltage v rrm 40 v maximum rms voltage v rms 28 v dc blocking voltage v r 40 v i f(av) 10 a peak forward surge current:8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 300 a typical thermal resistance, junction to ambient junction to lead (note 1) (note 2) r ja r jl 60 4 o c/w operating junction temperature and storage temperature range t j ,t stg -55 to + 150 o c average rectifi ed output current maximum features ? ideal for automated placement ? high efficiency operation ? low thermal resistance ? ? green molding compound as per iec61249 std. . (halogen free) lead free in compliance with eu rohs 2011/65/eu directive maximum
page . 2 SV1040 parameter symbol test conditions min. typ. max. unit breakdown voltage v br i r =1ma t a =25 o c40 - - v instantaneous forward voltage v f i f =5a i f =10a t a =25 o c - - 0.44 0.47 - v i f =5a i f =10a t a =125 o c - - 0.31 0.40 - - v reverse current i r v r =32v t a =25 o c- 32 - a v r =40v t a =25 o c t a =125 o c - - - - ma electrical characteristics (t a =25 o c unless otherwise noted) r ating and characteristic curves 0.01 0.1 1 10 0 0.2 0.4 0.6 i f , forward current (a) v f , forward voltage (v) t j =25c t j =75c t j =150c t j =125c 100 1000 10000 0.1 1 10 100 v r , reverse bias voltage (v) c j , junction capacitance (pf) 0 2 4 6 8 10 12 0 25 50 75 100 125 150 i f , f orwar d c urren t (a) t l , lead temperature (c) fig.4 typical forward characteristics fig.1 forward current derating curve fig.2 typical junction capacitance 0.5 1 0.7 32 0.001 0.01 0.1 1 10 100 1000 20 40 60 80 100 i r ,reverse current (ma) t j =25c t j =150c t j =125c t j =75c ig. typical reverse characteristics percent of rated peak reverse voltage june 01.2012-rev.02
mounting pad layout order information ? packing information t/r - 5k per 13" plastic reel unit inch(mm) unit inch(mm) 0.138 (3.50) 0.138 (3.50) 0.183 (4.65) 0.183 (4.65) 0.038 (0.97) 0.038 (0.97) 0.046 (1.18) 0.046 (1.18) 0.055 (1.40) 0.055 (1.40) 0.083 (2.10) 0.083 (2.10) page . 3 SV1040 june 01.2012-rev.02
page . 4 part no_packing code_version SV1040_r2_00001 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial n umber tape and reel (t /r) r 7" 1 rohs 1 serial n umber bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d SV1040 june 01.2012-rev.02
page . 5 disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ? ? since panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. SV1040 june 01.2012-rev.02
|
